39 photos
Mccain Myers pics The McCain Myer was one of, if not the first Myers replica ever made. The mask was made by Sam McCain of Horror Sanctum Studios. Only a handful of these masks were made and only 3 are known to still exist, making this mask ultra rare. * This mask is no longer in production, but may be found in the Michael-Myers.net classifieds or on eBay. MASK VALUED AT: $750 - $1,000/font>
20 photos
4 photos
11 photos
11 photos
Ideal Patient H2 (Phillip Bailey) Ideal Patient is an H2 made by Phillip Bailey. This mask originally came out around the time that the Warlock was released and due to the Warlocks success, few Ideal Patient masks were sold. * This mask is no longer in production, but may be found in the Michael-Myers.net classifieds or on eBay. MASK VALUED AT: $125 - $150
3 photos
Beckstrom Myers pics (Dennis Beckstrom) * This mask is no longer in production.
67 photos
Beckstrom Myers II pics (Dennis Beckstrom) Made by long time Don Post Studios employee, Dennis Beckstrom, this mask took approximately two and a half years to sculpt. The mask was first made as a Kirk, done by studying every photo of a ’75 Kirk Dennis could find, as well as photos he took of the ’75 Kirk. The result was a beautiful Myers mask that retained every little nuance of the original ’75 Kirk. Eight masks were made and they were sold with a numbered case, as well as a hand signed card that described the production process. Today, about half of the DB2's have been altered and only 4 are still in original condition. * This mask is no longer in production.
2 photos
Boogeyman (Boogeymanmasks) Numerous versions of the Boogeyman masks are available at http://www.boogeymanmasks.com. The most common is a V1 mask (a Halloween 1 replica) and a V2 (a Halloween 2 replica). Different version can be requested with varying finishes. *This mask is no longer in production.
8 photos
Boogeyman 2000 pics (Bogey) This is an earlier edition of the Boogyman mask series created by Boogyman Masks: http://www.boogeymanmasks.com/. * This mask is no longer in production.
11 photos
The Boogeyman 75 was made by David Pope at Boogeymanmasks. Believed to be a retool of the UL75 mold, it makes up for the detail the original UL mold lacks. *This mask is out of production
3 photos
Brother Pics (Boogeymanmasks) Brother is an H4 poster mask made by Boogeyman masks: http://www.boogeymanmasks.com. Very few of these masks were made making it quite rare. * This mask is no longer in production.
1 photo
Warlock 75 pics (Boogeymanmasks) Warlock 75 is an early run H1 replica made by Boogeymanmasks. * This mask is no longer in production. MASK VALUED AT: $150 - $175
9 photos
Worn (Bruce75) Worn is an H1 replica made by Myers Net member Bruce75. The mask was offered in two sizes a larger size which fit head sizes 24"-26" and small which will fit head sizes 22-24". * This mask is no longer in production. MASK VALUED AT: $100
13 photos
The Hiro Pics (CBK Productions)
4 photos
Damnation pics (Cemetery Gate Productions) Damnation was a very early Myers mask made by Terry Lambert at Cemetery Gate Productions. The mold was sold to another mask maker and some copies have surfaced. The CGP masks are signed on the inside flap. * This mask is no longer in production. MASK VALUED AT: $125 - $150 for the CGP version MASK VALUED AT: $75 - $100 for the non-CGP version
22 photos
Fear pics (Cemetery Gate Productions) This was the last Myers mask made by Cemetery Gate Productions. Fear is based on the scene in Halloween 1 when Michael comes out of the shadows to stab Laurie causing here to fall down the stair. Fear comes in two version, one with brown camel hair and another with black alpaca hair. * This mask is no longer in production. MASK VALUED AT: $200
3 photos
Fender Bender pics (Cemetery Gate Productions) Fender Bender is a Ben Tramer mask made by Cemetery Gate Productions. The mask is a converted St. Nick mask. Not many Fender Benders were made and they are quite rare. * This mask is no longer in production, but may be found in the Michael-Myers.net classifieds or on eBay. MASK VALUED AT: $150 - $200
50 photos
Killing Machine pics (Cemetery Gate Productions) Killing Machine is an early run H1 mask made by Cemetery Gate Productions. * This mask is no longer in production. MASK VALUED AT: $125 - $150
92 photos
Nemesis pics (Cemetery Gate Productions) Nemesis was originally made by Cemetery Gate Productions. Initially an H2 mask, a number of them were made up H1 style as well. There is a lot of variation on these masks in finish as well as in size. Also, the CGP masks tend to turn dark yellow. * This mask is no longer in production. CGP NEMESIS MASK VALUED AT: $200 - $250
6 photos
St. Nick pics (Cemetery Gate Productions) St. Nick is an H1 replica that was originally made by Cemetery Gate Productions. CGP sold the original mold to another mask maker and was offered by Black Lodge Studios prior to Black Lodge closing shop. * This mask is no longer in production. CGP MASK VALUED AT: $200 - $250
8 photos
Stardate 78 Pics (Cemetery Gate Productions) Stardate 78 is a Kirk replica made by Cemetery Gate Productions. Stardate 78 was a limited edition run of 20 masks. Each mask is numbered and signed on the inside flap. * This mask is no longer in production. CGP MASK VALUED AT: $250 - $300
12 photos
The Phantom pics (Cemetery Gate Productions) The Phantom is a very early run H1 replica made by Cemetery Gate Productions. * This mask is no longer in production. MASK VALUED AT: $125 - $150
6 photos
Trial by Fire pics (Cemetery Gate Productions) Trial by Fire is another Tramer masks made by Cemetery Gate Productions. * This mask is no longer in production. MASK VALUED AT: $125 - $150
13 photos
Trick or Treat pics (Cemetery Gate Productions) Trick or Treat is an early run H1 replica made by Cemetery Gate Productions. * This mask is no longer in production. MASK VALUED AT: $125 - $150
119 photos
Warlock pics (Cemetery Gate Productions) The Warlock, an H2 replica made by Cemetery Gate Productions, sold the most masks of any independent replica Myers mask ever produced. The mask was a collaboration between CGP and Dick Warlock, who provided a signed COA with ever mask. Although Dick's H2 was never used for the sculpture, the mask looked like Dick's face was in the mask. Finish on these masks vary quite a bit and the early run masks, with the yak belly hair and lighter finish, fetch significantly more money. CGP also released a Sandman Edition, which included blonde hair and much heavier finish. The SE used white, red, and yellow for the paint scheme. Later versions of the Warlock came in a regular, which will fit up to a 23" head size and a large, which will fit up to a 25" head size. CGP WARLOCK EARLY RUN MASK VALUED AT: $450 - $550 CGP WARLOCK REGULAR RUN MASK VALUED AT: $300 - $325 CGP WARLOCK SANDMAN EDITION MASK VALUED AT: $350 - $400 CGP still sells the mask at www.cemeterygateproductions.com
16 photos
Made by Creeping Death Productions
5 photos
Dark Force pics (Cryptic Kreations) Halloween 1 replica made by Cryptic Kreations. * This mask is no longer in production.
44 photos
98' Shatner pics In 1998, Don Post Studios got the green light to make another Shatner mask. Unlike the 1975 Kirk, this mask was quite cartoonish and only had a slight resemblance to William Shatner. For that reason, most Myers collectors have little interest in purchasing these for conversion. * This mask is no longer in production.
203 photos
99 Shatner Pics Unlike the 1998 Shatner mask, this mask, also known as the Kirk 1999 Deluxe Edition or the $100 Kirk, actually resembled William Shatner. This mask was released as a limited edition and is very rare. It is also a favorite of Myers collectors as a conversion candidate. * This mask is no longer in production.
9 photos
14 photos
A retooled version of his first Spectre mask, this version sports a much more accurate Castle Stretch.
2 photos
2 photos
13 photos
Ghastly (Ghastly Productions) Ghastly is a new H1 mask made by Ghastly Productions. There are two versions of Ghastly, a standard and SE version.
29 photos
Monster (Ghastly Productions) Monster is a new Myers mask by Ghastly Productions. Mask is still available through Ghastly Productions, contact User Name: myers04 and the cost is $200 plus shipping
8 photos
Mask created by Tommy Pickering (myers04)
6 photos
The Killer is a mask from Ghastly Productions. The mask comes in two versions, a standard and an SE.
13 photos
7 photos
Project 75 pics (Robert Hall) Project 75 is a very early run H1 replica made by Robert Hall. * This mask is no longer in production. MASK VALUED AT: $75 - $100
30 photos
8 photos
15 photos
4 photos
156 photos
Nick worked very hard, over very long months to bring us this special mask. Sculpted from the ground up, Nick used many, many references including photos of real 1975 Kirks and the knowledge of senior members.
17 photos
October 78 pics (Haunt Productions) October 78 is an H1 replica made by Haunt Productions. Very few of these masks were made, making it quite rare. * This mask is no longer in production. MASK VALUED AT: $150 - $175
10 photos
Ken Hertlein RARE pics (Ken Hertlein) Only two of these ultra rare masks were made by Ken Hertlein. This version of the KH looks more like a cross between an H1 and H2 mask. One belongs to Ken and the other belongs to Dick Warlock.
107 photos
KH H2 pics (Ken Hertlein) The Ken Hertlein SLE is a retool of Ken’s extremely popular KH/DW, which was a collaborative piece between artist Ken Hertlein and H2 actor Dick Warlock. Ken sculpted the original KH/DW referencing Dick Warlock's H2 "Hero" mask. For the KH SLE, Ken retooled most of the elements of the KH/DW in a quest to create the ultimate H2 mask. The changes included altering the eye brows, reducing the size of the chin, adjusting the size of the nose, matching the hair color to a lock of hair he obtained from the “Hero” mask, matching the paint scheme to the “Hero” mask, modifying the ears and reducing the overall size of the mask to replicate the size of the 75 Kirk. In addition, Ken added a logo of Haddenfield, IL state seal to the back of the mask and a carved pumpkin on the inside of the mask at the base of the head. This is a very sought after piece and is considered by most to be the best H2 mask ever made. * This mask is no longer in production. MASK VALUED AT: $1,500-$3,000
250 photos
KH / DW pics (Ken Hertlein) A collaborative piece between Ken Hertlein and Dick Warlock, Ken sculpted this limited edition mask referencing Dick Warlock's H2 "Hero". Only 30 masks were made. This is a very sought after piece and is considered by most to be the best H2 mask ever made. The majority of the masks have a brownish red hair color, however Ken ran out of hair towards the end of the run and a handful of the masks were finished with a dark brown hair. Also, due to the fact that Ken made these masks in the dog of winter, a large number of the masks have numerous air bubbles inside, but this is no cause for concern given the type of latex the Ken used which is extremely durable. * This mask is no longer in production. MASK VALUED AT: $3,000-$6,000
45 photos
The KH Ultimate is Ken's final attempt at Myers. It is a lifecast retool sculpt and is limited to 30 pieces. The mask comes with a COA containing a piece of hair from the hero mask. Amazing!
27 photos
Horror Sanctum Studio (Sam Mccain) Devious is Sam McCain's third Myers mask. The mask comes in two sizes and two versions, a regular which will fit a head size up to 22 1/2" and a large that will fit a head size of up to 25." The two versions are Devious 1, which has a strong H1 look and Devious 2, which has a strong H2 look. Mask is still available through Horror Sanctum Studio: http://www.horrorsanctum.com and the cost is $180 for Devious 1 and $200 for Devious 2, plus shipping.
3 photos
28 photos
Originally sculpted Kirk from Horror Sanctum.
27 photos
74 photos
Horror Sanctum Shape 08 The Shape 2008 is Sam McCain’s first new Myers mask in 27 years. It was also Sam’s first mask from his new company, Horror Sanctum Studios. Sam started with a life cast of William Shatner and sculpted a Kirk mask. From there, he converted the Kirk pulls to Myers masks and sold out the limited run of 30, sold out in under 24 hours. The Shape 2008 is Kirk size, in other words, it will only fit up to a 23” head size. * This mask is no longer in production. MASK VALUED AT: $325 - $350
25 photos
Horror Sanctum Shape 08 H2 version The Shape 2008 H2 is the first H2 mask to come out of Sam McCain’s new company, Horror Sanctum Studios. Sam retooled the Shape 2008 to resemble some of the darker scenes in Halloween 2. * This mask is no longer in production. MASK VALUED AT: $200 - $225
21 photos
Horror Sanctum Shape 08 Tramer version The Shape 2008 Tramer mask is based on the character in Halloween 2, Ben Tramer who sadly gets drunk at a party and dies in a flaming car crash wearing a Myers mask. Sam re-tooled the Shape 2008 to create this mask. * This mask is no longer in production. MASK VALUED AT: $100 - $150
51 photos
The Starkiller is a mask made by Matt of House of Horror Productions. This mask is derived from several casts of a genuine 1975 captain kirk. The face is a cast of Billy Kirkus's old kirk, then a clay press of Medley Kirk eyecuts were added to the sculpt.
15 photos
END pics (Harry Inman) Evil Never Dies is an early run H1 mask made by Harry Inman. * This mask is no longer in production, but may be found in the Michael-Myers.net classifieds or on eBay. MASK VALUED AT: $75 - $100
5 photos
